Automation
The first Hermle cell was purchased after an oil and gas OEM placed an order for 600 new types of manifold, bringing the total number of different parts produced for this customer alone to nearly 1,400. Almost all manifolds are made of 316 stainless steel, with just one percent machined from duplex and exotic alloys. Bryken’s director Phillip Taylor explained, “We don’t have any allegiances to favoured machine tool suppliers, always choosing the most appropriate, high-quality kit for the intended purpose. We opted for an automated cell from Hermle as it was the only solution that was a true billet-handling, 5-axis machining cell with a fully integrated robot. The other systems offered either had bolt-on component handling or were pallet-exchange configurations.” At the Knowsley factory, the Hermle cells work 24/7 and have an OEE (overall equipment effectiveness) above 90%. Mr Taylor says that the machines hardly ever stop. The first two cells produce around 2,000 parts per month. One machines about two-thirds of them spread across 15 different part numbers, while the
second has a more diverse workload involving smaller batch sizes. Currently all milling is 3+2, there being no need for 4- or 5-axis interpolation, and some very tight tolerances are held – for example, down to 12 µm on bore diameter and 0.4 µm surface finish. Even some length tolerances, which are defined by the machines’ axis motions rather than the tool, need to be within 25 µm total. Mr Taylor added, “Kingsbury’s after-sales service provision is well thought through. They have two proactive engineers nearby in Manchester, one specialising in service and the other in applications, who helps occasionally with programming. We produce most programs ourselves at the machine controls or using FeatureCAM if they are more complex.” Close to 100 staff are employed at the firm and a significant majority of turnover comes from turned parts production. The steep increase in automated prismatic parts machining therefore heralds an exciting further growth phase for the family-run company. n www.kingsburyuk.com
57 Machinery & Manufacturing
Powered by FlippingBook